rusty_emu/programs

MCS-4 Programs

This directory contains binary program files for the Intel MCS-4 emulator.

Available Programs

fibonacci.bin

• Size: 17 bytes
• Description: Fibonacci sequence generator (stores results in RAM)
• Algorithm: Calculates first 8 Fibonacci numbers using registers R0-R3 and RAM
• Instructions Used: FIM, CLB, LD, ADD, WRM, XCH, ISZ, NOP
• Output: Results stored in RAM via WRM

fibonacci_output.bin ✨ RECOMMENDED

• Size: 23 bytes
• Description: Enhanced Fibonacci sequence generator with output port visibility
• Algorithm: Calculates first 8 Fibonacci numbers and outputs them to RAM + output ports
• Instructions Used: FIM, CLB, LD, ADD, WRM, WMP, XCH, SRC, ISZ, NOP
• Output: Each Fibonacci number visible on output ports during execution
• Features: Real-time visibility of calculation progress

io_demo.bin ✨ NEW

• Size: 32 bytes (16 instructions × 2 bytes each)
• Description: I/O port demonstration program for Intel 4001
• Algorithm: Writes values to I/O ports 0-3 and reads them back
• Instructions Used: LDM, SRC, WRM, RDM, JCN
• Output: Demonstrates I/O port functionality with visible port states
• Features: Shows I/O port read/write operations and latching behavior

Usage

Programs are automatically loaded by the emulator. Use the --file option to specify a different program:

# Use default fibonacci program (RAM-based)
cargo run -- --system basic

# Use enhanced fibonacci program with output ports ✨
cargo run -- --system basic --file programs/fibonacci_output.bin

### io_demo.bin ✨ **NEW**
- **Size:** Assembly source (needs compilation to binary)
- **Description:** I/O port demonstration program for Intel 4001
- **Algorithm:** Writes values 1-4 to I/O ports 0-3 and reads them back
- **Instructions Used:** LDM, SRC, WRM, RDM, JCN
- **Output:** Demonstrates I/O port functionality with visible port states
- **Features:** Shows I/O port read/write operations and latching behavior

# Use I/O demonstration program ✨
cargo run -- --system mcs4_io_demo --file programs/io_demo.bin

# Use specific program
cargo run -- --system basic --file programs/myprogram.bin

Adding New Programs

1. Create your MCS-4 assembly program
2. Assemble it into raw binary format (big-endian byte pairs)
3. Save as .bin file in this directory
4. Update this README with program details

Program Format

MCS-4 programs are stored as raw binary data where each instruction is represented as 8-bit bytes. Multi-byte instructions (like addresses) use big-endian format.

Program Development Tips

Making Programs Visible

• Use Output Ports: Write results to output ports via WRR (ROM port) or WMP (RAM port) for visibility
• SRC Instruction: Select target chip/address with SRC before I/O operations
• Real-time Output: Numbers appear on output ports during execution
• System Monitoring: Watch RAM contents and output port states in real-time

Example Output Port Usage

FIM R0, 0x05  ; Load register pair R0/R1 with address (R0=0, R1=5)
SRC R0        ; Send register control from R0/R1 — selects chip/port
WRM           ; Write ACC to RAM main memory at selected address

Note

: SRC takes a register pair number (0-7), not a direct port number. The register pair contents form the 8-bit address used for I/O and RAM operations. See the Intel 4004 datasheet for details.