Update README.md

Move to codeberg

README.md

@@ -1,102 +1,3 @@
-# Infineon Traveo II Rust Project
+# Moved to codeberg
 
-This project is configured for developing applications on Infineon Traveo II microcontrollers using Rust.
+This project moved to https://codeberg.org/jhunnius/rusty_emu
-
-## Prerequisites
-
-### Required Tools
-
-1. **Rust Toolchain**
-   ```bash
-   rustup target add thumbv6m-none-eabi thumbv7em-none-eabi
-   rustup component add rust-src
-   ```
-
-2. **GNU Arm Embedded Toolchain**
-   - Download from: https://developer.arm.com/tools-and-software/open-source-software/developer-tools/gnu-toolchain/gnu-rm
-   - Install to: `C:\Program Files (x86)\GNU Arm Embedded Toolchain\10 2021.10\`
-   - Add to PATH environment variable
-
-3. **OpenOCD**
-   - Download from: http://openocd.org/
-   - Ensure `openocd.exe` is in your PATH
-
-4. **VSCode Extensions**
-   - Cortex-Debug (marus25.cortex-debug)
-   - Rust Analyzer (rust-lang.rust-analyzer)
-
-## Supported Devices
-
-- **Cortex-M7 devices**: CYT4BF, CYT4DN series
-- **Cortex-M0+ devices**: CYT2B7, CYT2B9 series
-
-## Project Structure
-
-```
-├── .vscode/
-│   ├── launch.json      # Debug configurations
-│   └── tasks.json       # Build tasks
-├── src/
-│   └── main.rs         # Application entry point
-├── memory.x            # Memory configuration (Cortex-M7)
-├── memory-m0.x         # Memory configuration (Cortex-M0+)
-├── build.rs           # Build script
-├── openocd.cfg        # OpenOCD configuration
-├── traveo-cyt4bf.cfg  # CYT4BF target config
-├── traveo-cyt2b7.cfg  # CYT2B7 target config
-└── Cargo.toml         # Project configuration
-```
-
-## Building
-
-### For Cortex-M7 devices (CYT4BF, CYT4DN)
-```bash
-cargo build --target thumbv7em-none-eabi --features traveo-cyt4bf
-```
-
-### For Cortex-M0+ devices (CYT2B7, CYT2B9)
-```bash
-cargo build --target thumbv6m-none-eabi --features traveo-cyt2b7
-```
-
-### Release builds
-```bash
-cargo build --release --target thumbv7em-none-eabi --features traveo-cyt4bf
-```
-
-## Debugging
-
-1. Connect your Traveo II development board
-2. Start OpenOCD:
-   ```bash
-   openocd -f openocd.cfg -f traveo-cyt4bf.cfg
-   ```
-3. In VSCode, use `F5` or go to Run and Debug panel
-4. Select the appropriate debug configuration:
-   - "Debug Traveo (Cortex-M7)" for CYT4BF/CYT4DN
-   - "Debug Traveo (Cortex-M0+)" for CYT2B7/CYT2B9
-
-## Memory Configuration
-
-- **Cortex-M7**: 6MB Flash, 512KB RAM, 64KB TCM
-- **Cortex-M0+**: 2MB Flash, 256KB RAM
-
-## Troubleshooting
-
-1. **OpenOCD not found**: Ensure OpenOCD is installed and in your PATH
-2. **Target not found**: Check that your development board is connected and powered
-3. **Build errors**: Make sure you have the correct target and features selected
-
-## Development Tips
-
-1. Use `panic-halt` for production code (default)
-2. Use `semihosting` feature for debugging output during development
-3. Memory regions can be customized in `memory.x` and `memory-m0.x` files
-4. Add device-specific configurations in the respective `.cfg` files
-
-## Next Steps
-
-1. Update the memory configurations for your specific device
-2. Add device-specific HAL code in `src/main.rs`
-3. Configure OpenOCD for your specific development board
-4. Add any additional dependencies needed for your application