rusty-telemetry

Multi-port UDP telemetry listener and analysis platform for sim racing games.

Receives real-time telemetry from Assetto Corsa and Project CARS 1 & 2 via UDP, parses binary packet formats, and provides live data via a terminal dashboard and REST API. Supports use-case driven analysis sessions for shift point optimization and track mapping.

Supported Games

Game	Feed	Port	Protocol	Data
Assetto Corsa	KSUDP (built-in)	9996	3-phase handshake, binary RTCarInfo	Speed, RPM, gear, inputs, G-forces, lap times, per-wheel slip, suspension
Assetto Corsa	Telemetry Tool Plugin	10101	Binary per-driver structs	All of KSUDP + tyre core temps, driver names, ERS, DRS, all cars
Project CARS 1	UDP Telemetry	5606	Binary V1 format (1367 bytes)	Speed, RPM, gear, inputs, engine temps, damage, weather, tyre wear
Project CARS 2	UDP Telemetry	5606	Binary V2 format (559 bytes)	All of PCARS1 + full 3D position, turbo boost, tyre compounds

All feeds are optional. If a feed fails to bind (e.g. the game isn't running), it shows as "not available" in the TUI and the other feeds continue normally.

Build and Run

cargo run --release

Press q or Ctrl+C to quit.

Configuration

Environment Variables

Variable	Purpose	Default
RUSTY_TELEMETRY_GAME_HOST	IP of the machine running the sim game (used for KSUDP handshake target)	127.0.0.1
RUSTY_TELEMETRY_LISTEN	Local address to bind for incoming UDP feeds (Telemetry Tool, PCARS)	0.0.0.0
RUSTY_TELEMETRY_BIND	Fallback for both of the above (backward compatibility)	—
RUSTY_TELEMETRY_API_PORT	REST API server port	8080
RUSTY_TELEMETRY_API_HOST	REST API server bind address	127.0.0.1

Same Machine

No configuration needed — defaults work out of the box:

cargo run --release

Remote Setup (game on a different machine)

Run rusty-telemetry on a separate machine (e.g. 192.168.1.100) while the game runs on another (e.g. 192.168.1.2):

# On the analysis machine:
RUSTY_TELEMETRY_GAME_HOST=192.168.1.2 cargo run --release

Then point the games at the analysis machine:

• KSUDP: Works automatically — AC sends telemetry back to the handshake's source address
• Telemetry Tool: Set to_ip = 192.168.1.100 in config.ini
• PCARS: Set target IP to 192.168.1.100 in the in-game UDP settings

Feed Setup

KSUDP (AC built-in, port 9996)

No additional setup. AC's built-in Remote Telemetry UDP server listens on port 9996 at startup. rusty-telemetry performs a 3-phase handshake automatically:

1. Sends HANDSHAKE to AC's port 9996
2. Receives 408-byte response (car name, driver name, track name in UTF-16LE)
3. Sends SUBSCRIBE_UPDATE to start continuous streaming at ~20 Hz

Important: Start AC before rusty-telemetry so AC can bind port 9996 first.

Telemetry Tool Plugin (AC, port 10101)

Optional third-party Python plugin by IkoRein. Provides richer data than KSUDP: tyre core temperatures, driver names, ERS, DRS, and data for all cars in the session.

1. Download from RaceDepartment
2. Extract to <AC>/apps/python/Telemetry_Tool_plugin/
3. Edit config.ini:

   [telemetry_tool_plugin]
   to_ip = 127.0.0.1
   to_port = 10101
   

4. Enable in python.ini: [TELEMETRY_TOOL_PLUGIN] ACTIVE=1
5. Restart AC

Project CARS 1 & 2 (port 5606)

Configure in-game to send telemetry to your machine's IP on port 5606.

PCARS 2: Options → System → UDP Protocol → set target IP/port, format 2 recommended.

PCARS 1: Options → Visual → UDP Protocol → set target IP/port.

The parser auto-detects the format: PCARS 1 (1367-byte packets, 3-byte header) or PCARS 2 (559-byte car physics packets, 12-byte header).

TUI

The terminal UI shows one panel per active feed:

┌──────────────────────────────────────────────────────────┐
│           rusty-telemetry v0.5.0 -- Telemetry Listener   │
├──────────────────────────────────────────────────────────┤
│ ╔ * Receiving      ╗                                     │
│ ║   20.0 Hz   1200 packets   15.2 KB/s   last: 0.05s    ║
│ ║   245 km/h  Gear:5  8750 RPM  Lap:1:23.456            ║
│ ║   THR: 85%  BRK:  0%  Pos:0.453                       ║
│ ╚→ :9996 recv :42132 [subscribed]╝                       │
│                                                          │
│ ╔ * Receiving      ╗                                     │
│ ║   60.0 Hz   3600 packets   45.8 KB/s   last: 0.01s    ║
│ ║   180 km/h  Gear:4  7200 RPM  Lap:1:18.123            ║
│ ║   THR: 72%  BRK:  0%  Pos:0.500                       ║
│ ╚  Telemetry Tool  Port :10101 ╝                         │
│                                                          │
│ ╔ . Bound, waiting for data ╗                            │
│ ║    0.0 Hz      0 packets    0.0 KB/s   last: never     ║
│ ╚  PCARS  Port :5606 ╝                                   │
├──────────────────────────────────────────────────────────┤
│ Recording: 550e8400-…     Ctrl+C Quit                    │
└──────────────────────────────────────────────────────────┘

Each panel shows:

• Health indicator and status (* green/alive, ~ yellow/stale, . gray/waiting, ! red/error)
• Packet frequency, total count, data rate, time since last packet
• Live telemetry: speed, gear, RPM, lap time, throttle/brake percentage, track position
• Connection mode (handshake with target/recv ports, or bind-listen)

Data Capture

All feeds are continuously recorded into in-memory ring buffers (5 minutes, 18,000 frames per feed). A recording is auto-started on launch; on shutdown, ring buffer contents are flushed to per-feed JSONL files:

./data/<uuid>/
├── manifest.json
├── feed_9996_ksudp.jsonl
├── feed_10101_telemetry_tool.jsonl
└── feed_5606_pcars.jsonl

Each recording has a manifest.json with metadata (game, track, car, use case, status, timestamps) and JSONL files for each feed. Each line is a serialized TelemetryFrame object.

Session-Based Analysis

Use-case sessions allow targeted data capture and analysis:

1. Create a session with a use case (shift_points or track_map)
2. Start runs — each run captures frames from the ring buffer between start and stop
3. Complete the session — auto-analyzes captured data and stores results
4. Retrieve analysis — shift point RPM ranges or track boundary coordinates

Sessions are in-memory and independent of persistent recordings.

REST API

A built-in HTTP API server runs on port 8080 for recording management and live telemetry access.

Endpoints

Method	Path	Description
GET	/api/live	Live telemetry snapshot (all feeds)
GET	/api/recordings	List all recordings
POST	/api/recordings	Start new recording
GET	/api/recordings/{id}	Get recording details
POST	/api/recordings/stop	Stop active recording
POST	/api/recordings/{id}/stop	Stop specific recording
DELETE	/api/recordings/{id}	Delete recording
GET	/api/recordings/{id}/data/{feed_name}	Download raw feed JSONL
GET	/api/use-cases	List valid use cases
GET	/api/games	List supported games
GET	/api/sessions	List all sessions
POST	/api/sessions	Create analysis session
GET	/api/sessions/{id}	Get session details
DELETE	/api/sessions/{id}	Delete session
POST	/api/sessions/{id}/runs	Start a run
POST	/api/sessions/{id}/runs/{run_id}/stop	Stop a run
POST	/api/sessions/{id}/complete	Complete session + auto-analyze
GET	/api/sessions/{id}/analysis	Get analysis results
POST	/api/sessions/{id}/analyze	Re-run analysis on completed session

Start Recording Body

{
  "name": "My Session",
  "game": "assetto_corsa",
  "track": "nurburgring",
  "car": "ferrari_488",
  "use_case": "general",
  "notes": "Testing session"
}

All fields are optional.

Live Telemetry Response

{
  "feeds": [
    {
      "label": "KSUDP",
      "port": 9996,
      "health": "alive",
      "frequency_hz": 20.0,
      "total_packets": 1200,
      "data_rate_kb_s": 15.2,
      "speed_kmh": 245.0,
      "gear": "5",
      "engine_rpm": 8750.0,
      "throttle": 0.85,
      "brake": 0.0,
      "lap_time": "1:23.456",
      "spline_position": 0.453
    }
  ],
  "active_recording": "550e8400-e29b-41d4-a716-446655440000"
}

Create Session Body

{
  "use_case": "shift_points",
  "label": "Shift Point Analysis Run 1"
}

Start Run Body

{
  "feed_name": "ksudp",
  "label": "Acceleration runs"
}

Shift Point Analysis Response

{
  "gear_ranges": [
    { "gear": 2, "gear_display": "1", "min_rpm": 3200, "max_rpm": 8500, "avg_rpm": 6100, "sample_count": 1200 },
    { "gear": 3, "gear_display": "2", "min_rpm": 5800, "max_rpm": 8400, "avg_rpm": 7200, "sample_count": 900 }
  ],
  "shift_events": [
    { "from_gear": 2, "to_gear": 3, "rpm_before_shift": 8400, "rpm_after_shift": 6100, "rpm_drop": 2300, "speed_kmh": 95.0 }
  ],
  "recommended_shift_rpm": 8400.0,
  "total_frames_analyzed": 2100
}

Testing

cargo test

32 unit tests covering:

• Binary parsers for all three feed formats (KSUDP, Telemetry Tool, PCARS V1/V2)
• Ring buffer frequency calculation and edge cases
• Feed health state machine transitions (Waiting → Alive → Stale → Alive)
• Packet validation, error handling, boundary conditions

Architecture

src/
├── main.rs                 Multi-port UDP listener, TUI event loop, KSUDP handshake
├── api.rs                  REST API server (axum) — recordings, sessions, live telemetry
├── recording.rs            Recording manager — ring buffers, manifest CRUD, flush to JSONL
├── session.rs              Session manager — use-case sessions, runs, frame extraction
├── analysis.rs             Analysis algorithms — shift points, track mapping
├── binary_utils.rs         Shared safe binary read helpers (bounds-checked, zero fallback)
├── telemetry_frame.rs      Unified telemetry data model (TelemetryFrame)
├── feed_state.rs           Per-feed health/frequency state machine with ring buffer
├── parser_ksudp.rs         AC KSUDP binary parser (RTCarInfo, 6 tests)
├── parser_telemetry_tool.rs AC Telemetry Tool binary parser (357-byte driver struct, 7 tests)
├── parser_pcars.rs          PCARS 1 & 2 binary parser with auto-detection (5 tests)
└── ui.rs                    Ratatui TUI rendering

License

Private project — not yet licensed for distribution.